Closet Lighting

Automatic Closet Lighting the instant you open the closet door!

X10's Closet Lighting Kit is almost like a closet remodel, without the wiring, contractors and high price tag...

Imagine your closet lighting up as you open the closet door and turning off as soon as you close it. No light switches and no closet light pull-strings needed. It's instant Closet Lighting only when you need it. It's the way closet lighting should be.

You heard right... no wiring and no contractors. You can set this kit up yourself and automate your existing closet lights in less than five minutes with nothing but a screwdriver!

Simply mount the Motion Sensor ($24.99 value) inside your closet with the two included screws. Then screw the Socket Lamp Module ($19.99 value) into the closet light fixture and screw in the bulb. Finally, plug the Transceiver ($12.99 value) into a wall socket anywhere in your house and you're done! It's that easy!

No more dark closet, no more leaving the closet light on... say hello to perfect, automated closet lighting the instant you open the closet door.

When we said no high price tag we meant it. This complete Closet Lighting Kit is only $9.99 today! And remember, there are a lot of companies that manufacture Home Automation, but there is only one X10, the industry standard. The fact that the technology used in Home Automation is named after us tells you everything you need to know. You're getting everything factory direct from the Home Automation experts!

• Motion triggers closet light to come on
• Closet light turns off after you close the closet door
• Set delay for closet light to turn off from 1-256 minutes after you close the closet
• Socket Lamp Module works with any standard light socket
• Transceiver doubles as a lamp/appliance module, so you can make an additional lamp or appliance motion-activated
• Everything included for a complete closet lighting system
• All pieces work with any other X10 home automation products
• No wires, no contractors or electricians - set it up yourself in less than 5 minutes

Mount the Wireless Motion Sensor anywhere that is convenient.

Plug the Wireless Transceiver into the wall.

Screw the Wireless Lamp Module into the light you wish to control and screw the bulb into the Module.

Set all the house codes to the same Letter, and assign the module a unique Unit Code. Make sure the codes match on your devices, and you're done!