Foyer Lighting

Instant Foyer Lighting - never come home to a dark house again!

Nobody likes entering the foyer of a dark house. It can be scary and dangerous not knowing if an intruder got in or something was left in the walkway for you to trip on. With instant Foyer Lighting, that will never be a problem!

The instant you walk in the front door, your foyer light will come on, clearing away the shadows so you know you're safe and have a clear path into your home. You'll never have to fumble around the wall to find that light switch again - it's all wireless and automated!

With this instant Foyer Lighting Kit, you're not going to need any new light fixtures or fancy, expensive, new equipment. It works with your existing Foyer Lighting and only takes a few minutes to set up!

Here's how easy it is:

Simply mount the Motion Sensor ($24.99 value) inside the front door near the foyer light, screw the Socket Lamp Module ($19.99 value) into your foyer lighting fixture and plug in the Transceiver ($12.99 value) into a wall socket and you're done. All it takes is those three easy steps and you've got motion-activated foyer lighting!

As soon as you enter your house, the Motion Sensor detects movement and sends a signal to the Transceiver, which relays that signal over your home's existing wiring to turn on the foyer lighting. When you leave, the Motion Sensor will send an off signal, so you don't leave the foyer light on all night or day. You can adjust the amount of time before the light goes off from 1-256 minutes.

When you order today, you get the complete Foyer Lighting Kit, valued at $57.97, for just $19.99. Remember, you're getting it factory direct from the Home Automation experts and you will not find a better price. Don't wait!

• Motion triggers foyer light to come on, and it turns off by itself
• Adjust the delay for the foyer lighting to turn off from 1-256 minutes after you leave the room
• Socket Lamp Module works with any standard light socket - overhead foyer light, lamp, wall scone, etc.
• Transceiver doubles as lamp/appliance module - make an additional lamp or appliance motion-activated
• Everything is fully compatible and works with any other X10 home automation products
• No wires, no contractors or electricians - set it up yourself in just a few minutes

Mount the Wireless Motion Sensor anywhere that is convenient

Plug the Wireless Transceiver into any outlet on the same circuit.

Screw the Wireless Lamp Module into the light you wish to control and screw the bulb into the Module.

Set all the house codes to the same Letter, and assign the module a unique Unit Code, and you're done!